These are digital files for a Sharpfire pusher breech kit which turns a stock Sharpfire into a high power blaster capable of firing half length darts from talon magazines.
Features:
- Option of using 17/32 brass or aluminium barrels
- Performance is around 150-160fps with a 9kg Retaliator spring
- Uses a “skinny” breech to allow swapping magazines with the breech closed
- Has a slim magwell with a low profile magazine release to keep the blaster compact
- Magwell is positioned slightly lower than usual for more reliable dart feeding
- Includes a grip filler to make the handle much more comfortable to hold
- Upgraded, more comfortable trigger
Additional Materials Required:
- 7/9/12kg Retaliator spring or similar
- (brass version) 10.5mm length of 1/2 inch K&S brand brass
- (brass version) 10-13cm length of 17/32 inch K&S brand brass depending on spring used
- (aluminium version) 10mm OD, 6mm ID, 2mm cross section pusher o-ring
- (aluminium version) 10-15cm length of 13mm ID, 16mm OD aluminium barrel
- Tighter or looser aluminium barrels will work with different pusher o-rings
- A small compression spring – one from a pen should work
NOTE: Kit will only work with non-angled talon style magazines. Angled talons or katana geometry magazines will not fit.
This kit requires quite precise cuts, though each step is explained in great detail.
Purchase includes 11 .stl files (plus extras) and a detailed guide to install the kit.
Join my Discord server: https://discord.gg/8t4S48YehV
Reviews
There are no reviews yet.