Meowser 3d Printed Fully Automatic Flycore Nerf Toy Blaster (.STL FILES ONLY)

**THE PRODUCT IN THIS LISTING ARE STL FILES FOR TOY FOAM DART BLASTERS**

**MUST HAVE FREE OFD FLYCORE STRAIGHT TO COMPLETE BLASTER** – Download here:

https://github.com/Oldfusiondesigns

Alternate Link:

https://www.printables.com/model/286951-ofd-flycore-straight-talon-design-your-next-printe

What is Meowser?
• Meowser is a fully automatic Talon and Tachi compatible blaster, and the first blaster to use Straight Talon Flycore
• This blaster was designed to showcase the capabilities and versatility of Flycore Details
• It can use every Straight Flycore configuration (FTW to Banned Blasters wheels, 6dps to 50dps, compatible with all straight talons, including tachis
• Ambidextrous mag release
• Single trigger rev and pusher
• Relatively little hardware
• Near endless configurations of Flywheels/motors/pusher motors
• Recommended battery size roughly 58x30x21mm or smaller
• Recommended batteries are: Most nightingale batteries, Worker 550 3s, tattu 450, 750 3s.
• I recommend you use xt30s with this blaster, most batteries will not fit with XT60

Recommended Configurations
• Pulsar + Kraken or Banshee Motors + 600rpm n20 = excellent 150fps sidearm
• Banned Blaster Wheels + Motors + 600rpm n20 = compact 200fps powerhouse
• FTW asteroids + Banshee motors + 1000rpm n20 = 115fps compact room clearing power
• Hurricane wheels + Banshee Motors 33mm crush + 600rpm n20 = 130fps HvZ BLISS

Licensing and Production
• Meowser is an “All Rights Reserved” product, meaning it can’t be copied or distributed without my permission.
• You have permission to print as many as you like for yourself, but are not allowed to resell files or prints without my permission or coming to an agreement.
• Personal remixes are fine, but files are not allowed to be shared, sold, or posted publically under any circumstance.
• If you wish to sell: 1 purchase = 1 license = 1 sold print, or arrange a licensing fee for roughly 10% of sale price

Hardware List
(1) Complete Straight Flycore (please see Flycore hardware list)
(4) M2x5mm motor screws
(4) M3x12mm Socket head cap screws for fidlock M side plates (OPTIONAL)
(12-14) M3x8mm Socket head cap screws
(1) Optional M3x8mm button head screw for RH Grip
(2-4) M2.6×10 or 12 toy screws (4 if using square barrel)
(5) M3x6 heat set inserts
(1) M3 Battery door thumb screw
(1) .28” LED Battery Volt Meter (optional)
(1) Spring ~20-22mm in length less than 7mm in diameter for mag release (Recommend McMaster 9657K297 Trimmed to 20mm)
(1) 21A Omron style switch without lever
(1) Cherry DB2 style 5-10A switch without lever
22GA wire for pusher and trigger switch
18GA wire for motors and rev switch

Assembly Tips
• Silicone grease on Trigger and mag release sliding components – this helps a lot with any roughness!
• Tighter gaps – there is clearance built into the side plates and frame screw holes – this is to account for print tolerance stack ups – make sure to close the gaps when tightening things down for a clean look!
• Caution – Printed threads: there is a lot of force that can be exerted with threads, so if you tighten the tip or suppressor accessory (in tactical package) on too tightly, it can break off the threads
• Bright sights – Use .078”/2mm fiber optic for a great sight picture! Just cut off the length you need and heat the ends with a lighter to expand to fit the print. Can also use 1.75mm filament as well.

FAQ
• My trigger doesn’t depress the rev switch!
a) You’ll need a stronger, or longer spring for this, please use the recommended spring at the recommended length if you have any issues!
• My mag release is sticky!
a) This can happen if there is a print tolerance issue, some lube or filing can fix the issue if you encounter it!
• Can I top load?
a) Sure! Please try the experimental dart guide found in the Flycore fileset
• Oh no! I’m getting whirly birds!
a) This can happen based on flywheel alignment, please be sure the flywheels are aligned to the middle of the dart and barrel!
• I have more questions, or my questions aren’t listed here!
a) No worries! Feel free to reach out to me on Etsy, or my discord: ag04#6231