Next up: The second item of the GenCo Storagewerke!

This is a storage container with a lockable lid that can hold loose darts, or rounds, or whatever necessary, in the usual stylings of GenCo. The only hardware it needs are M3x12mm, and M3x20mm wood screws. (Self-tapping, counter-sunk, coarse-threaded, essentially.)

This one comes without any insets as of yet, but some could be added later if desired. It’d have to be something stackable. As it is, it can hold roughly 1700 rival rounds, by my guesstimations. (I don’t actually have that many.)

The core is intended to be printed with transparent filament, so you can put LED strips along the inner bars and then have the whole thing light up like a cool power cell. There are also holes in the bottom, for dust and water to exit out of.

Printing:

It big. This is intended to be printed on something with 250mm edge length.

Everything should also already be in its proper printing orientation, if I didn’t miss anything.

The assembly instructions -> https://wildwestscifi.net/round-storage-box-assembly-instructions-1-0

https://youtu.be/5E2Dd_sEWpA <- A quick look at it, by your’s truly.

Changelog:

v1.0

– Initial Release