Spartan a nerf stringer blaster inspired off of the Halo Magnum. No other hardware is required other than elastic cord. This blaster utilizes an internal magazine with a capacity of 7-8 half length darts. This blasters fps will depend on the elastic put in it but it should have the fps as a typical half dart stringer. (Approximately 60-80 fps). Pull back on the slide to prime, insert darts into the internal magazine, and push the slide forward to load a dart.
Use 18 in of 1/8th inch elastic for best results. Link
The Spring STL is NOT MINE, original file comes from here (model license allows for commercial use) : https://www.printables.com/model/539241-bottom-and-spring-for-suret-mag-nerf-half-darttalo/files
All parts in this document (with the exception of the slide and mag spring) can be printed in regular PLA filament with 2-3 walls and 10% gyroid infill, and work perfectly fine. Some prints will require supports. Print the Slide with 4-5 walls. Print the Magazine Spring with PETG filament for the best results. You will need to print 3 of each pin variant, as stated in the file names.
The muzzle has 2 variants. One that features the cosmetic top piece, and a more practical muzzle that features a smoothed out top, and a front iron sight.
If the pins are too loose, tighter pins are available for download.
See the attached pdf document for assembly instructions.
The Spartan nerf blaster and other stringer blasters like half darts that have thick foam and a small head. For the best experience, use Worker Gen 3 Half darts or Adventure Force Pro half darts.
Questions or suggestions? Email me at: DBnerfstore@gmail.com
If you like my designs, and want to support any future designs, consider buying me a coffee at https://buymeacoffee.com/dubois
Subscribe to me on YouTube at @DubiousBwah
Reviews
There are no reviews yet.