These are digital files for a printed blaster stock. Like the Dual-Mag stock but wish you could use it on other blasters? Now you can. This stock will work on any blaster with a standard rail stock mount and adds two convenient sling points. The end plate is recommended to be printed in flexible filament (TPU) to make it extra comfortable.
Additional materials required:
- 10x M3 16mm screws
- 2x M3 hex nuts
- 2x M5 30mm screws
- 2x M5 hex nuts
Assembly:
- Drop an M3 hex nut into the cutout at the front of the stock body (refer to last photo), then tilt the stock body sideways so it falls into the pocket
- Install a M3 16mm screw and tighten it to pull the nut into place. Remove the screw. Repeat for the second hex nut
- Use 10x M3 16mm screws to attach the end plate, side plates, cheek rest, and stock mount to the stock body
- Use the 2x M5 30mm screws and 2x M5 hex nuts to attach the stock to a blaster of your choice
Note: Not able to be used on the Dual-Mag due to the blaster’s plunger rod sticking out the back.
Purchase includes 6 .stl files.
Join my Discord server: https://discord.gg/8t4S48YehV
Reviews
There are no reviews yet.