Pharaoh Pusher Breech Kit

These are digital files for a Pharaoh pusher breech kit which turns a stock Ultra Pharaoh into a high power blaster capable of firing half length darts.

Features:

• Option of using 17/32 brass or aluminium barrels
• Performance is around 170-180fps with the stock spring
• Uses a “skinny” breech to allow swapping magazines with the breech closed
• Magwell is sized to gravity-drop magazines with a low profile magazine release
• Magwell is set slightly lower than normal for more reliable dart feeding
• Bonus magazine adapter for the Pharaoh’s stock
• Includes spring rest reinforcement parts for using stronger springs
• Includes parts for shortening the barrel

Additional materials required:

• (brass version) 22-26cm length of 17/32 inch K&S brand brass depending on spring used
• (brass version) 10.5mm length of 1/2 inch K&S brand brass
• (aluminium version) 25-30cm length of 13mm ID, 16mm OD aluminium barrel depending on spring used
• (aluminium version) 10mm OD, 6mm ID, 2mm cross section pusher o-ring
• Tighter or looser aluminium barrels will work with different pusher o-rings
• 2x small compression springs (a pen spring should work)
• Optional: 14kg or 18kg Kronos spring for 200fps+

NOTE: Kit will only work with non-angled talon style magazines. Magazines using the katana geometry will not fit.

Purchase includes 14 .stl files (plus extras) and a detailed guide to install the kit.

Join my Discord server: https://discord.gg/8t4S48YehV