These are digital files for a Longshot pusher breech kit which turns a stock Longshot into a high power blaster capable of firing half length darts.
Features:
- Option of using 17/32 brass or aluminium barrels
- Performance is around 170-180fps with a 9kg Longshot spring
- Uses a “skinny” breech to allow swapping magazines with the breech closed
- Pusher has a slope on the base to make feeding darts a lot smoother
- Upgraded catch to make catching more reliable with higher spring loads
- Parts to permanently keep the stock in the extended position
- Magwell shims to fix loose magazine problems
- Lots of parts to reinforce the blaster’s weak points
Additional materials required:
- 9/14/18kg Longshot spring plus catch spring (such as the one from worker)
- Metal Longshot bolt sled (not needed with 9kg spring)
- Longshot pump grip (recommended)
- (brass version) 30-37cm length of 17/32 inch K&S brand brass depending on spring used
- (brass version) 10.5mm length of 1/2 inch K&S brand brass
- (aluminium version) 30-40cm length of 13mm ID, 16mm OD aluminium barrel depending on spring used
- (aluminium version) 10mm OD, 6mm ID, 2mm cross section pusher o-ring
- Tighter or looser aluminium barrels will work with different pusher o-rings
- One of these 2 pusher base o-rings:
- 1-1/8ths ID, 1-3/8ths OD, 1/8ths inch cross section o-ring
- 28mm ID, 35mm OD, 3.5mm cross section o-ring
NOTE: Pump grip files (pictured) aren’t included. Kit was designed around worker straight talon magazines and adapters. I cannot guarantee it will be compatible with other half dart magazine types.
Purchase includes 22 .stl files (plus extras) and a detailed guide to install the kit.
Join my Discord server: https://discord.gg/8t4S48YehV
Reviews
There are no reviews yet.