Turbine NERF Toy Blaster SCAR Barrel Cosmetic Oil Filter Shroud (Digital Files – STLs Only)

**THE PRODUCT IN THIS LISTING ARE STL FILES FOR TOY FOAM DART BLASTERS**

Note: REQUIRES Purchase of OFD Turbine or OFD Turbine-AN SCAR Barrel systems to use!

DISCLAIMER: Please be careful with shrouds such as this and your color choice, and always abide by all local laws and regulations. Shroud is designed to be cosmetic and may provide reduced performance over basic shrouds.

This is an shroud “expansion” to add to the increasing number shrouds available to change the look of your OFD Turbine SCAR barrel!

Features
1. Modular design
2. Compatible with Turbine, and Turbine-AN Scar Base releases
3. Simple glue-together construction, only body requires support
4. Letters embossed for easy painting/highlighting
5. 2 Separate versions included for each: Vented and Sealed versions for preference

Print Instructions and Orientation
• Body requires support from build surface
• Objects will need to be oriented as shown above in slicing program
• .2mm layer height recommended, but has been tested as coarse as .28
• 3 Perimeters + 20% infill is sufficient for all parts

FAQ/Recommendations
1. Which ones do I print?
a. Top: Shroud_Oil_Top_v10 is required for all prints
b. Bottom: Please choose either “Shroud_Oil_Bottom_V10″ for sealed body files or “Shroud_Oil_Bottom_Vented_V1” for Vented Body files.
c. Body: “AN” in the name and folder denotes compatibility with TurbineAN for Aeon/Nexus/19mm IDs, Normal bodies will fit long and short versions of the normal Turbine Scar body.
d. “AN” bodies are compatible with standard Turbine, although you will see the collet nut.
2. My paint is running into the layer lines, help!
a. Painting 3d prints can be tricky, using thicker paint, or spraying the body with a clearcoat to seal the lines helps greatly. It’s not advised to use a sharpie, as the ink is thin, causing bleed in the lines, but it can still look good from a distance if you’re in a hurry!
3. This FAQ doesn’t answer everything!
a. Please contact me via Etsy or Discord @ag04#6231 and I’ll be happy to help you out.

Each purchase allows for production of as many kits as you want for personal use. But only 1 kit may be sold, and purchasing another license will be needed.